代写EEEE4125 – Instrumentation and Measurements Coursework 2代写留学生Matlab语言

EEEE4125 – Instrumentation and Measurements

Coursework 2 RESIT –Load cell calibration

The re-examination for CW2 consists of the same exercises as the initial course, but you do not need to participate in the experiments. Instead, we will provide the calibration results. The results are obtained using the same method as suggested in the original course assignments. You need to use the provided calibration data and write a report, in which you will report the obtained results, calculate the uncertainty budget, and comment on the results. Calibrate using the method (the one you used in the laboratory) and suggest future improvements.

The rest of this document is the same as the original CW2 description document, except that the last page shows the calibration results that you will use.

Material List

1 -ina118p

1 - Veroboard Circuit

1 - The weighing sensor installed on the bracket

1 - Multimeter

1 - A set of 1Kg calibration weights

1 - Pair of gloves
1 - Forceps